Post by Admin on Jul 28, 2017 21:43:43 GMT -6
Updated as of June 10th 2021, Initial Setup (First turning on or after a factory reset)
N1/N2/N4K/N4Kx
N1/N2 are no longer supported. If they are still running then they will just run til they die from lack of updates, if you wiped them fully, that is it.
N4K and N4Kx still work but have no premium live TV support any longer
N7 Mufasa Edition
- Power on unit
- Scroll down to Network Settings
- Connect to either Wi-FI or Ethernet
- Go back to the home screen then click on MediaLab 2.0
- Click ok
- Allow permissions
- After it loads click ok when prompted
- Go back into MediaLab 2.0 and allow to load fully
- Enjoy!
N6 (that have filelinked and Mufasa TV on the left and right of the media lab on home screen)
1. Select Next
2. Choose your language
3. Adjust your screen size then
4. Connect to WiFi or Ethernet
5. Click on media lab and click OK and accept and allow any messages it tells you.
6. Allow 10+ minutes for the initial load and click OK when it finishes and tells you to.
7. Go back into the media lab and you can use!
N4K and N4Kx and N6 (N6 that have Updater and Clear updater to the left and right of the media lab on home screen)
1. Select Next
2. Choose your language
3. Adjust your screen size then
4. Connect to WiFi or Ethernet
5. Follow the steps --> here
N1/N2/N4K/N4Kx
N1/N2 are no longer supported. If they are still running then they will just run til they die from lack of updates, if you wiped them fully, that is it.
N4K and N4Kx still work but have no premium live TV support any longer
N7 Mufasa Edition
- Power on unit
- Scroll down to Network Settings
- Connect to either Wi-FI or Ethernet
- Go back to the home screen then click on MediaLab 2.0
- Click ok
- Allow permissions
- After it loads click ok when prompted
- Go back into MediaLab 2.0 and allow to load fully
- Enjoy!
N6 (that have filelinked and Mufasa TV on the left and right of the media lab on home screen)
1. Select Next
2. Choose your language
3. Adjust your screen size then
4. Connect to WiFi or Ethernet
5. Click on media lab and click OK and accept and allow any messages it tells you.
6. Allow 10+ minutes for the initial load and click OK when it finishes and tells you to.
7. Go back into the media lab and you can use!
N4K and N4Kx and N6 (N6 that have Updater and Clear updater to the left and right of the media lab on home screen)
1. Select Next
2. Choose your language
3. Adjust your screen size then
4. Connect to WiFi or Ethernet
5. Follow the steps --> here